Compatible Polyurethane and Acrylic/Epoxy Products

We sell a select group of coatings and sealants that are compatible with our epoxy products. These are very high quality products and we have tested them extensively. We list them here for your information, with links to additional information about the products. Go here for additional information on using our polyurethanes.

Sealants

Dymonic® FC

Dymonic® FC is a fast curing, low modulus, silane end-capped, polyurethane hybrid sealant. A general purpose sealant for all normal bonding, bedding and sealing.
For additional information, see our Dymonic® FC product page.

Dymonic® 100

Dymonic® 100 is a high-performance, high-movement polyurethane sealant. A bonding sealant for seams, joints and junctions where adhesive strength is of primary importance.
For additional information, see our Dymonic® 100 product page.

Coatings

Rhino Top

Rhino Top is a water-based acrylic/epoxy exterior coating emulsion that can be used with non-skid sand in suspension. For application to primed wood, concrete, asphalt. Coverage is 200–250 sq. ft. per gallon and at least two (2) coats are required for adequate thickness.
For additional information, see our Rhino Top product page.

Elasta-Tuff™ 6000-AL-HS and Accelerator

Elasta-Tuff 6000-AL-HS and Accelerator Elasta-Tuff™ 6000-AL-HS is a single-component liquid-applied elastomeric, abrasion resistant polyester-polyurethane finish/final coating. It is a flexible, UV stable top coating suitable for any surface that will accept paints and coatings. Its durability makes it useful for harsh environments such as high traffic areas, or boat decks and hulls that have to survive in a harsh marine environment. Elasta-Tuff™ Accelerator is recommended as an additive to Elasta-Tuff™ 6000-AL-HS when applying at lower temperatures.
For additional information, see our Elasta-Tuff™ 6000-AL-HS product page.

Elastuff™ 120

Elastuff 120 ELASTUFF™ 120 is a two component, 100% solids polyurethane base coating for wood, fiberglass, concrete or steel. Coverage is approximately 100 sq. ft. per gallon and at least two coats are required to get adequate thickness. One unit consists of parts A & B (mix 1:1).
For additional information, see our ELASTUFF™ 120 product page.